Features:
• OptiFill dispenser is standard
• Continuous residual salts removal by electro-deionization
• 100 litre storage tank with recirculation and pressure outlet
• Tank volume display in percent
• Tank volume can be modularly increased
• Simple, cost-effective filter replacement
• Leakage sensor is standard
Type II
Pure water performance l/h at 15 °C : 40
Conductivity μS/cm : 0.067 – 1
Resistance M Ω x cm : 15 – 1
Silicate removal* % : 99.9
Pure water tank pressurized outlet : optional
Type I
Conductivity μS/cm : 0.055
Resistance M Ω x cm : 18.2
TOC-value* ppb (with UV-unit) : 1 – 5
Dispensing performance dispenser l/min. : upto 2
Particles**/ml : < 1
Bacteria** CFU/ml : < 0.1
Feedwater requirements:
Softened water according to DIN 2000
Feedwater temperature °C : + 2 up to 35
Manganese and iron content mg/l : < 0.05
Free chlorine content mg/l : < 0.1
Silt density index (SDI) : max. 3
Technical data:
Operating pressure bar : 2 – 6
Supply voltage Volt/Hz : 90-240/50-60
Connected load kW : 0.25
Connector size : 3/4"
Ambient temperature °C : + 2 up to + 35
Dimensions Tower*** W x H x D mm : 511 x 1520 x 575
Dimensions Base cabinet tank mm : 511 x 800 x 575
Weight kg : 43
* in dependence on the feedwater quality ** with sterilizing filter 0.2 μm *** with OptiFill Dispenser
(RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm,sterile overflow and sterile vent filter + CO2 absorber included)
Typical applications : Feedwater for autoclaves and laboratory washers
